PartsTable
Technical Data Sheet
Download PDF

1793349 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1793349: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include special_features: USED ON 02-01-9600 SACRIFICIAL ANODE, HEAT EXCHANGER,D16M, end_item_identification: ENGINE, DIESEL, TYPE D116 45M. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-291-3084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1793349
NSN: 5331-00-291-3084
NIINs: 002913084, 016117316
FSC: 5331 — O-ring
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
special_featuresUSED ON 02-01-9600 SACRIFICIAL ANODE, HEAT EXCHANGER,D16M
end_item_identificationENGINE, DIESEL, TYPE D116 45M
NSN5331-00-291-3084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1793349 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 4.895 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 4.460 INCHES MINIMUM AND 4.490 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER4.895 INCHES NOMINAL IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER4.460 INCHES MINIMUM AND 4.490 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
OR1-349Reference document
Same NSN cross-reference
Reference document — Secondary reference
C-69-349Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PRP568-349-457-60Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PX1775-349Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS29513Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SR-822A-60-349Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1793349?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793349?
1793349 is a GASKET.
What parts can replace 1793349?
There are 9 known substitutes for 1793349: OR1-349, C-69-349, PRP568-349-457-60 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1793349?
1793349 is cataloged in the U.S. Government catalog under NSN 5331-00-291-3084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1793349