PartsTable
Technical Data Sheet
1793-389 ✓ Verified by PartsTable
Kodak Alaris · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>KODAK Capture Pro Software</b><br>Quickly and accurately convert large volumes of paper documents into high-quality images your business can use.<br><br>Intelligent and Flexible Capture Technology That Grows with Your Business<br>In this digital era, paper-centric departments and processes waste time and money. Whether you're scanning a hundred or a hundred thousand pages, there are too many manual tasks. Data entry, naming and filing scanned images, and a litany of data checks all burn through costly manpower.<br><br>Eliminate these expensive manual tasks with KODAK Capture Pro Software.<br><br>Automatically turn volumes of scanned data into information that's ready to use.

Your business processes will be faster, more accurate, and more cost effective.<br><br><b>Advanced Data Capture Software</b><br><br>Extract and Index with Confidence<br><br>Prevent post-scan rework with technology that automatically validates accurate capture. Intelligent Exception Processing immediately identif This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-067-7057, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
1793-389
NSN: 5331-01-067-7057
FSC: 5331 — O-RING
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
outside_diameter20.270 INCHES MINIMUM AND 20.480 INCHES MAXIMUM IN
center_hole_diameter19.910 INCHES MINIMUM AND 20.000 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-01-067-7057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1793-389 MFR: Kodak Alaris ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER: 20.270 INCHES MINIMUM AND 20.480 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 19.910 INCHES MINIMUM AND 20.000 INCHES MAXIMUM IN
HARDNESS RATING: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER20.270 INCHES MINIMUM AND 20.480 INCHES MAXIMUM IN
CENTER HOLE DIAMETER19.910 INCHES MINIMUM AND 20.000 INCHES MAXIMUM IN
HARDNESS RATING60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
298-68 47Interchangeable
interchangeable cross-reference
interchangeable
1750-705Interchangeable
interchangeable cross-reference
interchangeable
000444-1007Interchangeable
interchangeable cross-reference
interchangeable
2389Interchangeable
interchangeable cross-reference
interchangeable
1913954Interchangeable
interchangeable cross-reference
interchangeable
453318Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1793-389?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-389?
1793-389 is a O-RING manufactured by Kodak Alaris.
What parts can replace 1793-389?
There are 22 known substitutes for 1793-389: 298-68 47, 1750-705, 000444-1007 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1793-389?
1793-389 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-067-7057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1793-389