PartsTable
Technical Data Sheet
Download PDF

1793-261 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1793-261: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 6.964 INCHES MINIMUM AND 7.060 INCHES MAXIMUM IN, center_hole_diameter: 6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-291-3275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1793-261
NSN: 5331-00-291-3275
FSC: 5331 — O-ring
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter6.964 INCHES MINIMUM AND 7.060 INCHES MAXIMUM IN
center_hole_diameter6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-291-3275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1793-261 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 6.964 INCHES MINIMUM AND 7.060 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER6.964 INCHES MINIMUM AND 7.060 INCHES MAXIMUM IN
CENTER HOLE DIAMETER6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
AF934-176Reference document
Same NSN cross-reference
Reference document — Secondary reference
GS570EM261Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4A21Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
261-C-69Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
N0602 2-261Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29513-261Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 1793-261?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-261?
1793-261 is a O-RING.
What parts can replace 1793-261?
There are 8 known substitutes for 1793-261: AF934-176, GS570EM261, 4A21 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1793-261?
1793-261 is cataloged in the U.S. Government catalog under NSN 5331-00-291-3275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1793-261