PartsTable
Technical Data Sheet
Download PDF

1793-168 — CYLINDER SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1793-168: CYLINDER SLEEVE.

The CYLINDER SLEEVE is a the manufacturer industrial component. Key specifications include end_item_identification: DIESEL ENGINE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-404-4581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1793-168
NSN: 5331-00-404-4581
NIINs: 004044581, 015998502
FSC: 5331 — O-ring
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
end_item_identificationDIESEL ENGINE
NSN5331-00-404-4581
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1793-168 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 7.443 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 7.207 INCHES MINIMUM AND 7.267 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER7.443 INCHES NOMINAL IN
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER7.207 INCHES MINIMUM AND 7.267 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
PRP568-168-457-60Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SR-822A-60-168Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10V60-141-168Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29513-168Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS29513Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS9021-168Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1793-168?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-168?
1793-168 is a CYLINDER SLEEVE.
What parts can replace 1793-168?
There are 8 known substitutes for 1793-168: PRP568-168-457-60, SR-822A-60-168, 10V60-141-168 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1793-168?
1793-168 is cataloged in the U.S. Government catalog under NSN 5331-00-404-4581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1793-168