PartsTable
Technical Data Sheet
Download PDF

1793-130 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1793-130: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.797 INCHES MINIMUM AND 1.839 INCHES MAXIMUM IN, center_hole_diameter: 1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: MULTIPLE LAUNCH ROCKET SYSTEM (MLRS). This part is cataloged in the U.S.

Government catalog under NSN 5331-00-265-1086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1793-130
NSN: 5331-00-265-1086
FSC: 5331 — O-ring
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.797 INCHES MINIMUM AND 1.839 INCHES MAXIMUM IN
center_hole_diameter1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
NSN5331-00-265-1086
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1793-130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.797 INCHES MINIMUM AND 1.839 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.797 INCHES MINIMUM AND 1.839 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
SR-822A-60-130Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5331PL0196887Reference document
Same NSN cross-reference
Reference document — Informative reference only
5330002651086Reference document
Same NSN cross-reference
Reference document — Informative reference only
874453-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
GS570EM130Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
65088Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 1793-130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-130?
1793-130 is a O-RING.
What parts can replace 1793-130?
There are 9 known substitutes for 1793-130: SR-822A-60-130, 5331PL0196887, 5330002651086 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1793-130?
1793-130 is cataloged in the U.S. Government catalog under NSN 5331-00-265-1086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1793-130