PartsTable
Technical Data Sheet
Download PDF

1793-03 — 1793-03

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1793-03: 1793-03.

The 1793-03 is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: DISPOSABLE; 11.5 ML LONG; DESIGNED SPECIFICALLY FOR USE IN THE CHEST OR THORACIC AREA; UNIT QTY 12, part_name_assigned_by_controlling_agency: TROCAR THORAX 11.5ML LONG DISPOSABLE 12S. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-263-8011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1793-03
NSN: 5331-00-263-8011
NIINs: 002638011, 009462397, 013738974
FSC: 5331 — O-ring
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
general_characteristics_item_descriptionDISPOSABLE; 11.5 ML LONG; DESIGNED SPECIFICALLY FOR USE IN THE CHEST OR THORACIC AREA; UNIT QTY 12
part_name_assigned_by_controlling_agencyTROCAR THORAX 11.5ML LONG DISPOSABLE 12S
NSN5331-00-263-8011
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1793-03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.166 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.166 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
GHN10094-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS568-903 MIL-P-5315Reference document
Same NSN cross-reference
Reference document — Secondary reference
10V60-141-03Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
RT253-65-003Reference document
Same NSN cross-reference
Reference document — Secondary reference
AMS-P-5315ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29512-03Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 1793-03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-03?
1793-03 is a 1793-03.
What parts can replace 1793-03?
There are 9 known substitutes for 1793-03: GHN10094-3, AS568-903 MIL-P-5315, 10V60-141-03 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1793-03?
1793-03 is cataloged in the U.S. Government catalog under NSN 5331-00-263-8011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1793-03