PartsTable / O-RING / 1793-007
1793-007
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN, center_hole_diameter: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3832, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1793-007
NSN: 5331-00-248-3832 FSC: 5331 — O-RINGCAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN center_hole_diameter 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-248-3832
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1793-007
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
13026 Interchangeable interchangeable cross-reference
interchangeable
013026 Interchangeable interchangeable cross-reference
interchangeable
C69007 Interchangeable interchangeable cross-reference
interchangeable
MS29513-27 Interchangeable interchangeable cross-reference
interchangeable
MS29513-027 Interchangeable interchangeable cross-reference
interchangeable
AMS-P-5315A Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1793-007?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-007?
1793-007 is a O-RING.
What parts can replace 1793-007?
There are 31 known substitutes for 1793-007: 13026, 013026, C69007 and 28 more. Substitute compatibility should be verified for your specific system.
Is 1793-007 still available?
1793-007 is currently cancelled.
Request a Quote — 1793-007