PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 179162
179162 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include hole_diameter: 0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, outside_diameter: 0.215 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OR ZINC OVERALL, material_thickness: 0.012 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN, nondefinitive_spec/std_data: A TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-017-9162, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
179162
NSN: 5310-00-017-9162
FSC: 5310
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OVERALL
hole_diameter0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
outside_diameter0.215 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.012 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
nondefinitive_spec/std_dataA TYPE
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-017-9162
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 179162 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.012 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.215 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.012 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
HOLE DIAMETER0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALSTEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.215 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
00116Interchangeable
interchangeable cross-reference
interchangeable
25B203EInterchangeable
interchangeable cross-reference
interchangeable
15-483Interchangeable
interchangeable cross-reference
interchangeable
MILW6986TYPEAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 179162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 179162?
179162 is a CAPACITOR,FIXED,PAPER DIELECTRIC.
What parts can replace 179162?
There are 4 known substitutes for 179162: 00116, 25B203E, 15-483 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 179162?
179162 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-017-9162. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 179162

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026