PartsTable
Technical Data Sheet
Download PDF

179-3149 — STUD,CONTINUOUS THREAD

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

179-3149: STUD,CONTINUOUS THREAD.

The STUD,CONTINUOUS THREAD is a the manufacturer industrial component. Key specifications include overall_length: 4.00 INCHES NOMINAL IN, thread_direction: RIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED, end_item_identification: 3805-01-550-7164, part_name_assigned_by_controlling_agency: STUD-TAPERLO. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-291-3068, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
179-3149
NSN: 5331-00-291-3068
NIINs: 002913068, 016120787
FSC: 5331 — O-ring
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
overall_length4.00 INCHES NOMINAL IN
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
end_item_identification3805-01-550-7164
part_name_assigned_by_controlling_agencySTUD-TAPERLO
NSN5331-00-291-3068
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 179-3149 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.978 INCHES MINIMUM AND 3.034 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.785 INCHES MINIMUM AND 2.815 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.978 INCHES MINIMUM AND 3.034 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.785 INCHES MINIMUM AND 2.815 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
SR-822A-60-149Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10V60-141-149Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS29513-149Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-149 N602-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
3014496Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
60-P-31-148Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 179-3149?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 179-3149?
179-3149 is a STUD,CONTINUOUS THREAD.
What parts can replace 179-3149?
There are 9 known substitutes for 179-3149: SR-822A-60-149, 10V60-141-149, AS29513-149 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 179-3149?
179-3149 is cataloged in the U.S. Government catalog under NSN 5331-00-291-3068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 179-3149