Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CUTTER,MILLING,INVOLUTE GEAR is a Jumbo industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.741 INCHES MINIMUM AND 2.761 INCHES MAXIMUM IN, bolt_circle_diameter: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN, outside_corner_radius: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, cross-sectional_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-9184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
17879
NSN:5330-00-118-9184 FSC:5330 CAGE:70188 — FRANKLIN ENGINE CO INC (USA)
SPECIFICATIONS
material
ASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter
0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
2.741 INCHES MINIMUM AND 2.761 INCHES MAXIMUM IN
bolt_circle_diameter
2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
outside_corner_radius
0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
cross-sectional_thickness
0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
material_document_and_classification
-612,FSCM 70188 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-00-118-9184
COMPONENT DIAGRAM
KEY FEATURES
•
BOLT CIRCLE DIAMETER: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: -612,FSCM 70188 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT CIRCLE DIAMETER
2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
HOLE DIAMETER
0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATION
-612,FSCM 70188 MFR REF SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17879?
17879 is a CUTTER,MILLING,INVOLUTE GEAR manufactured by Jumbo.
What parts can replace 17879?
There are 6 known substitutes for 17879: B94.19 TABLE 25, MS15701-280, 17879 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17879?
17879 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-9184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.