1784551-61 — SETSCREW

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

1784551-61: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4032 OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, point_length: 0.051 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN, spline_width: 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-501-3085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1784551-61

NSN: 5305-01-501-3085
FSC: 5305 — Screws
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)

SPECIFICATIONS

material	STEEL COMP 4032 OVERALL
head_style	HEADLESS (SETSCREW)
point_style	FLAT
point_length	0.051 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
spline_width	0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
thread_class	3A A
fastener_length	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM OVERALL
point_chamfer_angle	45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
internal_drive_style	SIX SPLINE
spline_major_diameter	0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NSN	5305-01-501-3085

COMPONENT DIAGRAM

KEY FEATURES

•

SPLINE MINOR DIAMETER: 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN

•

POINT LENGTH: 0.051 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

SPLINE WIDTH: 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: FF-S-200, TYPE 2, STYLE 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPLINE MAJOR DIAMETER: 0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN

•

POINT CHAMFER ANGLE: 45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM

TECHNICAL CHARACTERISTICS

SPLINE MINOR DIAMETER	0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
POINT LENGTH	0.051 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
FASTENER LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SPLINE WIDTH	0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	FF-S-200, TYPE 2, STYLE 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPLINE MAJOR DIAMETER	0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
POINT CHAMFER ANGLE	45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	HEADLESS (SETSCREW)

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1784551-61?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1784551-61?

1784551-61 is a SETSCREW.

What is the NSN for 1784551-61?

1784551-61 is cataloged in the U.S. Government catalog under NSN 5305-01-501-3085. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1784551-61 — SETSCREW

Request a Quote — 1784551-61