17791P — SLEEVE,SHAFT,PUMP

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

17791P: SLEEVE,SHAFT,PUMP.

The SLEEVE,SHAFT,PUMP is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY K-500 OVERALL, corner_shape: SQUARE INSIDE RIGHT CORNER, overall_length: 4.3440 INCHES NOMINAL IN, hardness_rating: 265.0 BRINELL STANDARD NOMINAL OVERALL, keyway_dimension: 0.3750 INCHES NOMINAL INTERNAL KEYWAY LENGTH IN, special_features: LEFT END FLANGE HAS A GROOVE 1.890 IN. OD,1.500 IN.

WIDE IN. This part is cataloged in the U.S. Government catalog under NSN 4320-00-952-4947, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

17791P

NSN: 4320-00-952-4947
FSC: 4320 — Power and Hand Pumps
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)

SPECIFICATIONS

material	NICKEL ALLOY K-500 OVERALL
corner_shape	SQUARE INSIDE RIGHT CORNER
overall_length	4.3440 INCHES NOMINAL IN
hardness_rating	265.0 BRINELL STANDARD NOMINAL OVERALL
keyway_dimension	0.3750 INCHES NOMINAL INTERNAL KEYWAY LENGTH IN
special_features	LEFT END FLANGE HAS A GROOVE 1.890 IN. OD,1.500 IN. WIDE IN
style_designator	SOLID, PLAIN, NO OUTSIDE FLANGES, INTERNAL FLANGE AT BOTH ENDS
features_provided	CASEHARDENED
body_inside_diameter	1.8710 INCHES MINIMUM AND 1.8720 INCHES MAXIMUM IN
body_outside_diameter	2.4950 INCHES MINIMUM AND 2.50000 INCHES MAXIMUM IN
left_internal_flange_width	3.1250 INCHES NOMINAL IN
right_internal_flange_width	0.7500 INCHES NOMINAL IN
NSN	4320-00-952-4947

COMPONENT DIAGRAM

KEY FEATURES

•

LEFT INTERNAL FLANGE WIDTH: 3.1250 INCHES NOMINAL IN

•

CORNER SHAPE: CHAMFERED INSIDE LEFT CORNER

•

RIGHT INTERNAL FLANGE WIDTH: 0.7500 INCHES NOMINAL IN

•

BODY OUTSIDE DIAMETER: 2.4950 INCHES MINIMUM AND 2.50000 INCHES MAXIMUM IN

•

HARDNESS RATING: 265.0 BRINELL STANDARD NOMINAL OVERALL

TECHNICAL CHARACTERISTICS

LEFT INTERNAL FLANGE WIDTH	3.1250 INCHES NOMINAL IN
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPE	ROUND OUTSIDE RIGHT CORNER
RIGHT INTERNAL FLANGE WIDTH	0.7500 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER	2.4950 INCHES MINIMUM AND 2.50000 INCHES MAXIMUM IN
HARDNESS RATING	265.0 BRINELL STANDARD NOMINAL OVERALL
STYLE DESIGNATOR	SOLID, PLAIN, NO OUTSIDE FLANGES, INTERNAL FLANGE AT BOTH ENDS
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

OTHER ITEMS IN FSC 4320 — Power and Hand Pumps

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4320-00-001-1633 4320-00-001-2628 4320-00-001-2629 4320-00-001-2630 4320-00-001-2631 4320-00-001-2632 4320-00-001-3377 4320-00-001-3384

SUBSTITUTES & CROSS-REFERENCES 1

RY-135596Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 17791P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 17791P?

17791P is a SLEEVE,SHAFT,PUMP.

What parts can replace 17791P?

There is 1 known substitute for 17791P: RY-135596. Substitute compatibility should be verified for your specific system.

What is the NSN for 17791P?

17791P is cataloged in the U.S. Government catalog under NSN 4320-00-952-4947. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

17791P — SLEEVE,SHAFT,PUMP

Request a Quote — 17791P