The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN, length: 0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.069 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, overall_height: 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-119-6362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1779168-5
NSN:5340-01-119-6362 FSC:5340 — Hardware, Commercial CAGE:07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
width
0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
length
0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
material
COPPER ALLOY 172 OVERALL
hole_diameter
0.069 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
overall_height
0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
precious_material
SILVER
surface_treatment
SILVER OVERALL
material_thickness
0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
loop/holding_dimension
0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
precious_material_and_location
OVERALL SILVER
distance_from_loop_center_to_end
0.160 INCHES NOMINAL IN
NSN
5340-01-119-6362
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-S-365,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PRECIOUS MATERIAL: SILVER
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
LENGTH
0.207 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-S-365,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
PRECIOUS MATERIAL
SILVER
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.160 INCHES NOMINAL IN
SURFACE TREATMENT
SILVER OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1779168-5?
1779168-5 is a CLIP,SPRING TENSION.
What parts can replace 1779168-5?
There are 2 known substitutes for 1779168-5: 100-300-2-7, 6013-13C. Substitute compatibility should be verified for your specific system.
What is the NSN for 1779168-5?
1779168-5 is cataloged in the U.S. Government catalog under NSN 5340-01-119-6362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.