PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17791
17791 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

DVI-I digital/analogous 24+5 plug to DVI-I digital/analogous 24+5 plug Dual Link 1.8m. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_width: 2.062 INCHES NOMINAL IN, body_height: 3.125 INCHES NOMINAL IN, body_length: 2.312 INCHES NOMINAL IN, hole_diameter: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-7194, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17791
NSN: 5330-00-297-7194
FSC: 5330
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_width2.062 INCHES NOMINAL IN
body_height3.125 INCHES NOMINAL IN
body_length2.312 INCHES NOMINAL IN
hole_diameter0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.375 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
overall_length12.0 MILLIMETERS NOMINAL MM
mounting_methodTHREADED STUD(S) SINGLE GROUP
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
style_designatorNON-CIRCULAR
aperture_diameter2.312 INCHES NOMINAL IN
NSN5330-00-297-7194
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17791 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 2.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL: ASBESTOS AND STEEL OVERALL
•
OUTSIDE CORNER RADIUS: 0.438 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
LUBRICATION MATERIAL: GRAPHITE BOTH SIDES
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER2.312 INCHES NOMINAL IN
OVERALL WIDTH4.375 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIALASBESTOS AND STEEL OVERALL
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.500 INCHES NOMINAL IN
HOLE DIAMETER0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
LUBRICATION MATERIALGRAPHITE BOTH SIDES
LUBRICATION METHODCOATED
BOLT HOLE QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
29295Interchangeable
interchangeable cross-reference
interchangeable
17791Interchangeable
interchangeable cross-reference
interchangeable
16846Interchangeable
interchangeable cross-reference
interchangeable
984839-1CInterchangeable
interchangeable cross-reference
interchangeable
6515NCM104982Interchangeable
interchangeable cross-reference
interchangeable
02.210.112Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17791?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17791?
17791 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Clementoni.
What parts can replace 17791?
There are 7 known substitutes for 17791: 29295, 17791, 16846 and 4 more. Substitute compatibility should be verified for your specific system.
Is 17791 still available?
17791 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17791

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026