PartsTable
Technical Data Sheet
Download PDF

177827 — SCREW,MACHINE

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

177827: SCREW,MACHINE.

- Perfect all-round protection for the Apple iPhone 7 Plus in a slim look - Slip-in compartments for cards or the like - Soft inside lining that protects the sensitive display - Booklet case with a slim design - Two inner compartments e.g. for business cards - Smartphone holder with rubber finish that is pleasant to the touch - Pleasant silky outer material - Without fastener This part is cataloged in the U.S. Government catalog under NSN 5305-00-017-7827, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
177827
NSN: 5305-00-017-7827
FSC: 5305 — Screws
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM IN
thread_length1.750 INCHES MINIMUM IN
fastener_length3.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-017-7827
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 177827 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 3.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.750 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH3.500 INCHES NOMINAL IN
THREAD LENGTH1.750 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH18
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
FFS92TYPE1STYLE4SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 177827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 177827?
177827 is a SCREW,MACHINE manufactured by Hama.
What parts can replace 177827?
There is 1 known substitute for 177827: FFS92TYPE1STYLE4S. Substitute compatibility should be verified for your specific system.
What is the NSN for 177827?
177827 is cataloged in the U.S. Government catalog under NSN 5305-00-017-7827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 177827