PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 177701-35

177701-35 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 10.0 MILLIMETERS NOMINAL MM, overall_width: 6.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-690-1860, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
177701-35
NSN: 3110-00-690-1860
FSC: 3110
CAGE: 71791 — CURTISS-WRIGHT CONTROLS, INC. DBA CURTISS WRIGHT DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter10.0 MILLIMETERS NOMINAL MM
overall_width6.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter22.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data111 TYPE AND 1 CLASS AND 00 GRADE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-690-1860
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 177701-35 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 1 CLASS AND 00 GRADE
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY OD; AS MODIFIED BY O/A WIDTH
•
OVERALL OUTSIDE DIAMETER: 22.0 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
NONDEFINITIVE SPEC/STD DATA111 TYPE AND 1 CLASS AND 00 GRADE
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY OD; AS MODIFIED BY O/A WIDTH
OVERALL OUTSIDE DIAMETER22.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH6.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
A-A-59582InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A-A-59582-504JEBHInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
177709-63InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AJ9800-23-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
HDT001InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-B-171/2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 177701-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 177701-35?
177701-35 is a BEARING,BALL,ANNULAR.
What parts can replace 177701-35?
There are 32 known substitutes for 177701-35: A-A-59582, A-A-59582-504JEBH, 177709-63 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 177701-35?
177701-35 is cataloged in the Federal Logistics Information System under NSN 3110-00-690-1860. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 177701-35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026