PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17766
17766 ✓ Verified by PartsTable
Trust · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Super compact and flat design. 2 selectable angles. Protective rubber pads.

. Key specifications include material: PAPER OVERALL, body_width: 0.240 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, seat_angle: 37.0 DEGREES FIRST END, body_height: 0.085 INCHES MAXIMUM IN, body_length: 1.726 INCHES MAXIMUM IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-071-0273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17766
NSN: 3110-00-071-0273
FSC: 3110
CAGE: 00781 — CESSNA AIRCRAFT CO ARC AVIONICS DIV (USA)
SPECIFICATIONS
materialPAPER OVERALL
body_width0.240 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
seat_angle37.0 DEGREES FIRST END
body_height0.085 INCHES MAXIMUM IN
body_length1.726 INCHES MAXIMUM IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
bore_diameter0.1875 INCHES NOMINAL IN
hole_diameter0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.1250 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length6.0 INCHES NOMINAL IN
NSN3110-00-071-0273
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 17766 · Trust ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INNER RING, ROLLER, SINGLE LIP
•
SMALLEST OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.1875 INCHES NOMINAL IN
STYLE DESIGNATORINNER RING, ROLLER, SINGLE LIP
OVERALL WIDTH0.1250 INCHES NOMINAL IN
SMALLEST OUTSIDE DIAMETER0.3125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
17766Interchangeable
interchangeable cross-reference
interchangeable
17766-02Interchangeable
interchangeable cross-reference
interchangeable
17766-04Interchangeable
interchangeable cross-reference
interchangeable
17766-27Interchangeable
interchangeable cross-reference
interchangeable
17766-73Interchangeable
interchangeable cross-reference
interchangeable
17766-91Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17766?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17766?
17766 is a HOSE ASSEMBLY,NONMETALLIC manufactured by Trust.
What parts can replace 17766?
There are 14 known substitutes for 17766: 17766, 17766-02, 17766-04 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17766?
17766 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-071-0273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17766

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026