PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1774-6
1774-6 ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Gameport cable, InLine®, DB15 M/F. Key specifications include phase: THREE, length: 24.000 INCHES NOMINAL IN, capacity: 306.0 GALLONS TANK, material: STEEL OVERALL, bore_type: STRAIGHT, body_style: TUBULAR, FLANGED, W/TERMINALS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-6575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1774-6
NSN: 5330-00-171-6575
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
phaseTHREE
length24.000 INCHES NOMINAL IN
capacity306.0 GALLONS TANK
materialSTEEL OVERALL
bore_typeSTRAIGHT
body_styleTUBULAR, FLANGED, W/TERMINALS
case_styleSQUARE
port_styleINVERTED FLARE SINGLE PORT
seal_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
bore_diameter0.875 INCHES NOMINAL IN
heat_quantity1
hole_diameter0.406 INCHES NOMINAL IN
NSN5330-00-171-6575
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1774-6 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
SIDE RADIUS FROM GASKET CENTER: 1.188 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
SIDE RADIUS FROM GASKET CENTER1.188 INCHES NOMINAL IN
HOLE DIAMETER0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS OVERALL
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.500 INCHES NOMINAL IN
OVERALL WIDTH4.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
185N114Interchangeable
interchangeable cross-reference
interchangeable
17746Interchangeable
interchangeable cross-reference
interchangeable
48894Interchangeable
interchangeable cross-reference
interchangeable
EW9021Interchangeable
interchangeable cross-reference
interchangeable
17507Interchangeable
interchangeable cross-reference
interchangeable
10-473Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1774-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1774-6?
1774-6 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by InLine.
What parts can replace 1774-6?
There are 18 known substitutes for 1774-6: 185N114, 17746, 48894 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1774-6?
1774-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-6575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1774-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026