PartsTable
Technical Data Sheet
PartsTable / MRO / 17719
17719 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

InLine® S-VGA monitor cable with double shielding for video signal transmission. Constructed with 3 single-shielded coaxial lines (RGB) and 7 data lines this cable is fitted with 15-pin SVGA connectors with 1:1 connections (without PIN 9) while the blue colouring of the connectors, as per PC99 standard, ensures easy identification of the correct port to which the SVGA monitor cable should be connected. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-054-8194, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 17719
NSN: 5315-00-054-8194
FSC: 5315
CAGE: 56705 — DONALLCO INC (USA)
SPECIFICATIONS
diameter0.062 INCHES NOMINAL IN
materialALUMINUM AND PLASTIC
mesh_size8.0
thickness0.080 INCHES NOMINAL IN
point_typeEXTENDED PRONG ANGLE CUT
body_length2.140 INCHES NOMINAL IN
body_diameter0.345 INCHES NOMINAL IN
terminal_typeWIRE LEAD
wire_diameter0.02800 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
terminal_length1.500 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL EACH END
NSN5315-00-054-8194
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17719 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.062 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 0.875 INCHES NOMINAL IN
•
POINT TYPE: EXTENDED PRONG ANGLE CUT
•
STYLE DESIGNATOR: STANDARD
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AN-P-61 MIL STD SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.062 INCHES NOMINAL IN
UNDERLOOP LENGTH0.875 INCHES NOMINAL IN
POINT TYPEEXTENDED PRONG ANGLE CUT
STYLE DESIGNATORSTANDARD
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAN-P-61 MIL STD SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
17719Interchangeable
interchangeable cross-reference
interchangeable
157D1-0757Interchangeable
interchangeable cross-reference
interchangeable
6622Interchangeable
interchangeable cross-reference
interchangeable
MOX-2-12-9206FInterchangeable
interchangeable cross-reference
interchangeable
GR815CW92005F5Interchangeable
interchangeable cross-reference
interchangeable
472MEDSTBLZKITInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17719?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17719?
17719 is a STRAINER ELEMENT,SEDIMENT manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17719?
There are 7 known substitutes for 17719: 17719, 157D1-0757, 6622 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17719?
17719 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-054-8194. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17719

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026