PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1770XDMPC30
1770XDMPC30 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, housing_bore_diameter: 1.575 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.812 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-1456, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1770XDMPC30
NSN: 5330-00-256-1456
FSC: 5330
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
housing_bore_diameter1.575 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.812 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-256-1456
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1770XDMPC30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.575 INCHES NOMINAL IN
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.575 INCHES NOMINAL IN
SEAL WIDTH0.312 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
721866-4Interchangeable
interchangeable cross-reference
interchangeable
1293-4Interchangeable
interchangeable cross-reference
interchangeable
360610-011Interchangeable
interchangeable cross-reference
interchangeable
14403Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-70 TY1SEBSTBInterchangeable
interchangeable cross-reference
interchangeable
15726Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1770XDMPC30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1770XDMPC30?
1770XDMPC30 is a SEAL,PLAIN ENCASED.
What parts can replace 1770XDMPC30?
There are 10 known substitutes for 1770XDMPC30: 721866-4, 1293-4, 360610-011 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1770XDMPC30?
1770XDMPC30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-1456. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1770XDMPC30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026