PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 177010PC297
177010PC297 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL COMP 1117 OVERALL, first_end_style: OVAL, first_end_location: BOTH ENDS, pin_overall_length: 1.625 INCHES NOMINAL IN, first_end_outer_radius: 0.219 INCHES NOMINAL IN, second_end_relationship_with_first_end: IDENTICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-246-9175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
177010PC297
NSN: 5315-00-246-9175
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 1117 OVERALL
first_end_styleOVAL
first_end_locationBOTH ENDS
pin_overall_length1.625 INCHES NOMINAL IN
pin_size_designation3
first_end_outer_radius0.219 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-246-9175
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 177010PC297 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 1.625 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SIZE DESIGNATION: 3
•
FIRST END OUTER RADIUS: 0.219 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL: STEEL COMP 1117 OVERALL
•
FIRST END STYLE: OVAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH1.625 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SIZE DESIGNATION3
FIRST END OUTER RADIUS0.219 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL COMP 1117 OVERALL
FIRST END STYLEOVAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
F114-50-7Interchangeable
interchangeable cross-reference
interchangeable
MILP16610Interchangeable
interchangeable cross-reference
interchangeable
202753Interchangeable
interchangeable cross-reference
interchangeable
404-61Interchangeable
interchangeable cross-reference
interchangeable
MS24692-180Interchangeable
interchangeable cross-reference
interchangeable
2431180-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 177010PC297?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 177010PC297?
177010PC297 is a PIN,TAPERED,PLAIN.
What parts can replace 177010PC297?
There are 15 known substitutes for 177010PC297: F114-50-7, MILP16610, 202753 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 177010PC297?
177010PC297 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-246-9175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 177010PC297

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026