PartsTable
Technical Data Sheet
PartsTable / MRO / 17700-935
17700-935 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: HOLE MOUNTED, bore_shape: STRAIGHT, bore_diameter: 80.00 MILLIMETERS NOMINAL MM, overall_width: 2.6875 INCHES NOMINAL IN, actuator_style: ROLLER ARM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 17700-935
NSN: 3110-00-156-5363
FSC: 3110
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleHOLE MOUNTED
bore_shapeSTRAIGHT
bore_diameter80.00 MILLIMETERS NOMINAL MM
overall_width2.6875 INCHES NOMINAL IN
actuator_styleROLLER ARM
inclosure_typeUNINCLOSED
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter170.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-156-5363
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 17700-935 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
BORE DIAMETER80.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OVERALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
VA-305BInterchangeable
interchangeable cross-reference
interchangeable
MIL-E-1/1288Interchangeable
interchangeable cross-reference
interchangeable
8316Interchangeable
interchangeable cross-reference
interchangeable
31-335Interchangeable
interchangeable cross-reference
interchangeable
682-0029-01Interchangeable
interchangeable cross-reference
interchangeable
31-33SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17700-935?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17700-935?
17700-935 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17700-935?
There are 25 known substitutes for 17700-935: VA-305B, MIL-E-1/1288, 8316 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17700-935?
17700-935 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17700-935

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026