PartsTable / COMPONENT / 176G
176G
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, housing_bore_diameter: 3.189 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8394, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
176G
NSN: 5330-00-285-8394 FSC: 5330 CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN housing_bore_diameter 3.189 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.000 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-285-8394
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 176G
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 3.189 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE SEAL WIDTH 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN HOUSING BORE DIAMETER 3.189 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 2.000 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
20094 Interchangeable interchangeable cross-reference
interchangeable
33V28 Interchangeable interchangeable cross-reference
interchangeable
49-164 Interchangeable interchangeable cross-reference
interchangeable
506 1.1875 Interchangeable interchangeable cross-reference
interchangeable
21356 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 176G?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 176G?
176G is a SEAL,PLAIN ENCASED.
What parts can replace 176G?
There are 20 known substitutes for 176G: 20094, 33V28, 49-164 and 17 more. Substitute compatibility should be verified for your specific system.
Is 176G still available?
176G is currently cancelled.