PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1768-080/006-3SPPF
1768-080/006-3SPPF ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 1768-080/006-3SPPF is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-159-7926, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1768-080/006-3SPPF
NSN: 5330-00-159-7926
FSC: 5330
CAGE: 04319 — PARKER-HANNIFIN CORPORATION DBA PARKER HANNIFIN ADVANCED PRODUCTS CO DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
Part Number1768-080/006-3SPPF
NSN5330-00-159-7926
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1768-080/006-3SPPF MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
PRECIOUS MATERIAL: SILVER
•
APERTURE DIAMETER: 1.258 INCHES MINIMUM AND 1.264 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.270 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: STEEL COMP 321 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
PRECIOUS MATERIALSILVER
APERTURE DIAMETER1.258 INCHES MINIMUM AND 1.264 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEMETAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
OUTSIDE DIAMETER1.270 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIALSTEEL COMP 321 OVERALL
SURFACE TREATMENTSILVER OVERALL
PRECIOUS MATERIAL AND LOCATIONSURFACE SILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
119604-1Interchangeable
interchangeable cross-reference
interchangeable
120-125Interchangeable
interchangeable cross-reference
interchangeable
119604Interchangeable
interchangeable cross-reference
interchangeable
X2-860Interchangeable
interchangeable cross-reference
interchangeable
P-1768-C-AG-PFInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1768-080/006-3SPPF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1768-080/006-3SPPF?
1768-080/006-3SPPF is a 1768-080/006-3SPPF.
What parts can replace 1768-080/006-3SPPF?
There are 5 known substitutes for 1768-080/006-3SPPF: 119604-1, 120-125, 119604 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1768-080/006-3SPPF?
1768-080/006-3SPPF is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-159-7926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1768-080/006-3SPPF

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026