PartsTable
Technical Data Sheet
Download PDF

17673-1 — CLAMP,LOOP

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

17673-1: CLAMP,LOOP.

- Folding case that provides perfect all-round protection for the Samsung Galaxy S7 edge - Booklet case with a transparent back: the design of the smartphone remains visible - Slip-in compartment for cards or the like - One inner compartment e.g. for business cards - Slim smartphone case with pleasant silky outer material - Without fastener This part is cataloged in the U.S. Government catalog under NSN 5340-01-027-5754, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17673-1
NSN: 5340-01-027-5754
FSC: 5340 — Hardware, Commercial
CAGE: 00853 — CORNELL-DUBILIER MARKETING INC (USA)
SPECIFICATIONS
diameter0.110 INCHES NOMINAL AND 0.154 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.250 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter1.375 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.442 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.317 INCHES NOMINAL IN
NSN5340-01-027-5754
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17673-1 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.110 INCHES NOMINAL AND 0.154 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.442 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.317 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.110 INCHES NOMINAL AND 0.154 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.442 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.317 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER1.375 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
507A726-001-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A726-001-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 17673-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17673-1?
17673-1 is a CLAMP,LOOP manufactured by Hama.
What parts can replace 17673-1?
There are 2 known substitutes for 17673-1: 507A726-001-001, A726-001-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 17673-1?
17673-1 is cataloged in the U.S. Government catalog under NSN 5340-01-027-5754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17673-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.