PartsTable
Technical Data Sheet
Download PDF

176227 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
Hama · BALL BEARING
PRODUCT OVERVIEW

176227: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a Hama industrial component. Key specifications include end_item_identification: KC-46 AIRCRAFT, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-124-7753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
176227
NSN: 3120-01-124-7753
NIINs: 011247753, 016874790
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 09455 — RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS (USA)
SPECIFICATIONS
end_item_identificationKC-46 AIRCRAFT
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN3120-01-124-7753
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 176227 · Hama ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 1.2060 INCHES MINIMUM AND 1.2080 INCHES MAXIMUM IN
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM INNER MEMBER
•
OUTER MEMBER WIDTH: 0.9320 INCHES MINIMUM AND 0.9420 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITH INSERT AND/OR LINER WITH STAKING GROOVE
•
STATIC RADIAL LOAD RATING: 39500 POUNDS LBS
•
BORE DIAMETER: 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 440C INNER MEMBER
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH1.2060 INCHES MINIMUM AND 1.2080 INCHES MAXIMUM IN
HARDNESS RATING58.0 ROCKWELL C MINIMUM INNER MEMBER
HARDNESS RATING28.0 ROCKWELL C MINIMUM OUTER RACE MEMBER
OUTER MEMBER WIDTH0.9320 INCHES MINIMUM AND 0.9420 INCHES MAXIMUM IN
STYLE DESIGNATORWITH INSERT AND/OR LINER WITH STAKING GROOVE
STATIC RADIAL LOAD RATING39500 POUNDS LBS
BORE DIAMETER1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C INNER MEMBER
MATERIALPLASTIC POLYURETHANE RACE LINER
MATERIALSTEEL COMP 410 OUTER RACE MEMBER
SUBSTITUTES & CROSS-REFERENCES 2
SBS40ATC67ZReference document
Same NSN cross-reference
Reference document — Secondary reference
ABWT20V-102Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 176227?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 176227?
176227 is a BEARING,PLAIN,SELF-ALIGNING manufactured by Hama.
What parts can replace 176227?
There are 2 known substitutes for 176227: SBS40ATC67Z, ABWT20V-102. Substitute compatibility should be verified for your specific system.
What is the NSN for 176227?
176227 is cataloged in the U.S. Government catalog under NSN 3120-01-124-7753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 176227