PartsTable
Technical Data Sheet
Download PDF

1760.032 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1760.032: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 0.906 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.375 INCHES NOMINAL IN, overall_length: 1.656 INCHES NOMINAL IN, shank_diameter: 0.874 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-312-1730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1760.032
NSN: 5315-00-312-1730
NIINs: 003121730, 014537232
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length0.906 INCHES NOMINAL IN
thread_class2A A
thread_length0.375 INCHES NOMINAL IN
overall_length1.656 INCHES NOMINAL IN
shank_diameter0.874 INCHES NOMINAL IN
first_end_styleCHAMFERED
style_designatorSHOULDER
thread_directionRIGHT-HAND
shoulder_diameter1.437 INCHES NOMINAL IN
first_end_locationBOTH ENDS
first_hole_diameter0.453 INCHES NOMINAL IN
NSN5315-00-312-1730
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1760.032 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.874 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
•
THREAD LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.453 INCHES NOMINAL IN
•
SHANK LENGTH: 0.906 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.874 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
THREAD LENGTH0.375 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.453 INCHES NOMINAL IN
SHANK LENGTH0.906 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OVERALL LENGTH1.656 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
01760-0032Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 1760.032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1760.032?
1760.032 is a PIN,SHOULDER,HEADLESS.
What parts can replace 1760.032?
There is 1 known substitute for 1760.032: 01760-0032. Substitute compatibility should be verified for your specific system.
What is the NSN for 1760.032?
1760.032 is cataloged in the U.S. Government catalog under NSN 5315-00-312-1730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1760.032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.