PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17592
17592 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,WASHER,THRUST is a Clementoni industrial component. Key specifications include diameter: 0.9260 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, flange_thickness: 0.0940 INCHES NOMINAL IN, outside_diameter: 1.8830 INCHES NOMINAL IN, style_designator: ROUND, overall_thickness: 0.1700 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-6987, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17592
NSN: 5330-00-256-6987
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
diameter0.9260 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
flange_thickness0.0940 INCHES NOMINAL IN
outside_diameter1.8830 INCHES NOMINAL IN
style_designatorROUND
overall_thickness0.1700 INCHES NOMINAL IN
surface_conditionLAPPED
shank_outside_diameter1.0830 INCHES NOMINAL IN
center_hole_shape_styleROUND
cross-sectional_shape_styleSHOULDERED
NSN5330-00-256-6987
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17592 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 2
•
OUTSIDE CORNER RADIUS: 0.406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
SIDE RADIUS FROM GASKET CENTER: 1.094 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.500 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY2
OUTSIDE CORNER RADIUS0.406 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
SIDE RADIUS FROM GASKET CENTER1.094 INCHES NOMINAL IN
APERTURE DIAMETER1.438 INCHES NOMINAL IN
MATERIALASBESTOS OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
20617Interchangeable
interchangeable cross-reference
interchangeable
17592Interchangeable
interchangeable cross-reference
interchangeable
R6180ZPC1AInterchangeable
interchangeable cross-reference
interchangeable
1909560Interchangeable
interchangeable cross-reference
interchangeable
C396Interchangeable
interchangeable cross-reference
interchangeable
43094Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17592?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17592?
17592 is a BEARING,WASHER,THRUST manufactured by Clementoni.
What parts can replace 17592?
There are 22 known substitutes for 17592: 20617, 17592, R6180ZPC1A and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17592?
17592 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-6987. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17592

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026