PartsTable
Technical Data Sheet
Download PDF

17589-045 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

17589-045: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, hole_diameter: 0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN, overall_diameter: 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, surface_treatment: CADMIUM OR ZINC OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-420-1817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17589-045
NSN: 5310-01-420-1817
FSC: 5310 — Nuts and Washers
CAGE: 0NWN1 — STERIS CORPORATION DBA STERIS APPLIED STERILIZATION TECHNOLOLGIES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
hole_diameter0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
overall_diameter0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR ZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-420-1817
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17589-045 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
•
THICKNESS: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
7-950-100141Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 17589-045?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17589-045?
17589-045 is a WASHER,FLAT.
What parts can replace 17589-045?
There is 1 known substitute for 17589-045: 7-950-100141. Substitute compatibility should be verified for your specific system.
What is the NSN for 17589-045?
17589-045 is cataloged in the U.S. Government catalog under NSN 5310-01-420-1817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17589-045

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.