175478: MICROCIRCUIT,DIGITAL.
The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include bore_diameter: 1.5622 INCHES MINIMUM AND 1.5628 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, outer_ring_width: 0.2500 INCHES NOMINAL IN, style_designator: SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE, end_item_identification: CIRCUIT CARD ASSY, A: CIRCUIT CARD ASSEMB. This part is cataloged in the U.S.
Government catalog under NSN 3110-00-998-5024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| bore_diameter | 1.5622 INCHES MINIMUM AND 1.5628 INCHES MAXIMUM IN |
| load_direction | RADIAL |
| inner_ring_width | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN |
| outer_ring_width | 0.2500 INCHES NOMINAL IN |
| special_features | THE PARTS SHALL BE MADE FROM 175446-01 BY PROGRAMMING THE REQUIRED CONFIGURATION; THIS MICROCIRCUIT IS A 32,000 GATE FIELD PROGRAMMABLE GATE ARRAY. |
| style_designator | SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE |
| supplementary_features | P/N 175446- MICROCIRCUIT, FPGA, SX, 32K GATES; EACH DEVICE PROGRAMMED WITH BUYERS SOFTWARE NUMBER P/N 580671; CHECKSUM E27B; MOISTURE SENSITIVE. |
| end_item_identification | CIRCUIT CARD ASSY, A: CIRCUIT CARD ASSEMB |
| overall_outside_diameter | 1.9994 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN |
| part_name_assigned_by_controlling_agency | MICROCIRCUIT, FIELD PROGRAMMABLE GATE ARRAY, SIDE B INTERFACE |
| NSN | 3110-00-998-5024 |
| OUTER RING WIDTH | 0.2500 INCHES NOMINAL IN |
| STYLE DESIGNATOR | SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE |
| OVERALL OUTSIDE DIAMETER | 1.9994 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN |
| LOAD DIRECTION | RADIAL |
| SPECIAL FEATURES | 0.0005 IN. MIN TO 0.0015 IN. MAX RADIAL CLEARANCE ALSO FRACTURED OUTER RING WITH 2 HOLDING RING ON OD IN |
| BORE DIAMETER | 1.5622 INCHES MINIMUM AND 1.5628 INCHES MAXIMUM IN |
| INNER RING WIDTH | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.