1753M38P15 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1753M38P15: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.818 INCHES NOMINAL IN, center_hole_diameter: 1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-078-3592, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1753M38P15

NSN: 5331-00-078-3592
FSC: 5331 — O-ring
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.818 INCHES NOMINAL IN
center_hole_diameter	1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-078-3592

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.818 INCHES NOMINAL IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.818 INCHES NOMINAL IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 6

AS3582-130Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-130 S604-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

S8057R159Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS9068-130Reference document

Same NSN cross-reference

Reference document — Secondary reference

S0604 2-130Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 1753M38P15?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1753M38P15?

1753M38P15 is a O-RING.

What parts can replace 1753M38P15?

There are 6 known substitutes for 1753M38P15: AS3582-130, 2-130 S604-70, S8057R159 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1753M38P15?

1753M38P15 is cataloged in the U.S. Government catalog under NSN 5331-00-078-3592. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1753M38P15 — O-RING

Request a Quote — 1753M38P15