PartsTable
Technical Data Sheet
Download PDF

175134 — BRAKE,ELECTRIC

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

175134: BRAKE,ELECTRIC.

The BRAKE,ELECTRIC is a Hama industrial component. Key specifications include material: STEEL COMP 8630 OVERALL, brake_type: DISK, end_radius: 0.500 INCHES NOMINAL IN, fork_depth: 0.750 INCHES NOMINAL IN, speed_type: TORQUE, shank_length: 3.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-120-8941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
175134
NSN: 5340-00-120-8941
NIINs: 001208941, 014231094
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 8630 OVERALL
brake_typeDISK
end_radius0.500 INCHES NOMINAL IN
fork_depth0.750 INCHES NOMINAL IN
speed_typeTORQUE
shank_length3.750 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
actuator_typeMAGNETIC
overall_width0.750 INCHES NOMINAL IN
thread_length0.375 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.684 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
fork_span_width0.438 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
NSN5340-00-120-8941
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 175134 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.684 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.438 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3134 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
END RADIUS: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.375 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 3.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.684 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
FORK SPAN WIDTH0.438 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.3123 INCHES MINIMUM AND 0.3134 INCHES MAXIMUM IN
FORK ARM THICKNESS0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
END RADIUS0.500 INCHES NOMINAL IN
THREAD LENGTH0.375 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH3.750 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 175134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 175134?
175134 is a BRAKE,ELECTRIC manufactured by Hama.
What is the NSN for 175134?
175134 is cataloged in the U.S. Government catalog under NSN 5340-00-120-8941. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 175134