PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 175-47
175-47 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include usage_design: ANTI-CORROSION LUBRICANT, overall_width: 1.590 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, overall_height: 1.390 INCHES NOMINAL IN, overall_length: 2.290 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S) SINGLE GROUP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-165-9357, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
175-47
NSN: 5330-00-165-9357
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
usage_designANTI-CORROSION LUBRICANT
overall_width1.590 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height1.390 INCHES NOMINAL IN
overall_length2.290 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S) SINGLE GROUP
application_typeCOLD
winding_quantity1 SINGLE COMPONENT
nominal_thread_size0.112 INCHES SINGLE GROUP IN
reliability_indicatorNOT ESTABLISHED
mounting_hole_diameter0.180 INCHES NOMINAL SINGLE GROUP IN
end_item_identification4320-01-533-6418;600 GPM PUMP ASSEMBLY,WATER
NSN5330-00-165-9357
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 175-47 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
31040Interchangeable
interchangeable cross-reference
interchangeable
1105510Interchangeable
interchangeable cross-reference
interchangeable
J9295-40KInterchangeable
interchangeable cross-reference
interchangeable
A-A-55497Interchangeable
interchangeable cross-reference
interchangeable
0723 8707Interchangeable
interchangeable cross-reference
interchangeable
B107.48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 175-47?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 175-47?
175-47 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Hama.
What parts can replace 175-47?
There are 19 known substitutes for 175-47: 31040, 1105510, J9295-40K and 16 more. Substitute compatibility should be verified for your specific system.
Is 175-47 still available?
175-47 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 175-47

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026