PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17492
17492 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CYLINDER ASSEMBLY,HYDRAULIC BRAK. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL OVERALL, head_style: HEXAGON, port_style: GASKET SEAL LOCATION NOT OTHERWISE SPECIFIED, head_height: 0.364 INCHES NOMINAL IN, overall_width: 1.480 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-276-8676, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17492
NSN: 5330-00-276-8676
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL OVERALL
head_styleHEXAGON
port_styleGASKET SEAL LOCATION NOT OTHERWISE SPECIFIED
head_height0.364 INCHES NOMINAL IN
overall_width1.480 INCHES NOMINAL IN
thread_length6.0 INCHES NOMINAL IN
heat_treatmentT-6 SOLUTION HEAT TREATED
overall_height1.260 INCHES NOMINAL IN
reservoir_typeINTEGRAL
extended_length9.031 INCHES NOMINAL IN
fastener_length10.0 INCHES NOMINAL IN
NSN5330-00-276-8676
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17492 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
CENTER HOLE DIAMETER: 1.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECUP
CENTER HOLE DIAMETER1.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
A2316-008BLInterchangeable
interchangeable cross-reference
interchangeable
A-2136-008-BLInterchangeable
interchangeable cross-reference
interchangeable
850075Interchangeable
interchangeable cross-reference
interchangeable
E3584Interchangeable
interchangeable cross-reference
interchangeable
242768R91Interchangeable
interchangeable cross-reference
interchangeable
3573Interchangeable
IBM TS3200 Tape Library
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17492?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17492?
17492 is a CYLINDER ASSEMBLY,HYDRAULIC BRAK.
What parts can replace 17492?
There are 13 known substitutes for 17492: A2316-008BL, A-2136-008-BL, 850075 and 10 more. Substitute compatibility should be verified for your specific system.
Is 17492 still available?
17492 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17492

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026