PartsTable
Technical Data Sheet
Download PDF

17488P11 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

17488P11: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.094 INCHES NOMINAL IN, diameter: 0.306 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.078 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-050-5016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17488P11
NSN: 5315-00-050-5016
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
height0.094 INCHES NOMINAL IN
diameter0.306 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.078 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.438 INCHES NOMINAL IN
under_head_length1.531 INCHES NOMINAL IN
first_hole_diameter0.101 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.156 INCHES NOMINAL IN
NSN5315-00-050-5016
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17488P11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.078 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.531 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.101 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.438 INCHES NOMINAL IN
•
DIAMETER: 0.306 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.531 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.101 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.438 INCHES NOMINAL IN
DIAMETER0.306 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
HEAD STYLEFLAT
HEIGHT0.094 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
505016Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5315000505016Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 17488P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17488P11?
17488P11 is a PIN,STRAIGHT,HEADED.
What parts can replace 17488P11?
There are 2 known substitutes for 17488P11: 505016, 5315000505016. Substitute compatibility should be verified for your specific system.
What is the NSN for 17488P11?
17488P11 is cataloged in the U.S. Government catalog under NSN 5315-00-050-5016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17488P11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.