PartsTable
Technical Data Sheet
PartsTable / MRO / 17470-2
17470-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR SET,MATCHED is a the manufacturer industrial component. Key specifications include length: 2.875 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.939 INCHES NOMINAL IN, overall_width: 1.970 INCHES NOMINAL IN, overall_height: 0.125 INCHES NOMINAL IN, overall_length: 3.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-143-5766, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 17470-2
NSN: 5310-00-143-5766
FSC: 5310
CAGE: 71791 — CURTISS-WRIGHT CONTROLS, INC. DBA CURTISS WRIGHT DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
length2.875 INCHES NOMINAL IN
materialSTEEL OVERALL
belt_quantity2
hole_diameter0.939 INCHES NOMINAL IN
overall_width1.970 INCHES NOMINAL IN
overall_height0.125 INCHES NOMINAL IN
overall_length3.875 INCHES NOMINAL IN
outside_diameter1.234 INCHES NOMINAL IN
performance_typeSTANDARD CAPACITY
size_designationSMALL
special_features11 1/2-13 IN. KNEE CIRCUMFERENCE; FOAM CARTILAGE PAD; PATENTED HELICAL SPRING STAYS IN
style_designatorPLAIN
NSN5310-00-143-5766
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17470-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.939 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.234 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.939 INCHES NOMINAL IN
OVERALL HEIGHT0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER1.234 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
128A2244G22Interchangeable
interchangeable cross-reference
interchangeable
1C1747-02Z1Interchangeable
interchangeable cross-reference
interchangeable
1747-02Interchangeable
interchangeable cross-reference
interchangeable
HCF13714Interchangeable
interchangeable cross-reference
interchangeable
5009060Interchangeable
interchangeable cross-reference
interchangeable
9470-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17470-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17470-2?
17470-2 is a RESISTOR SET,MATCHED. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17470-2?
There are 8 known substitutes for 17470-2: 128A2244G22, 1C1747-02Z1, 1747-02 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17470-2?
17470-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-143-5766. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17470-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026