PartsTable
Technical Data Sheet
Download PDF

1746-N14 — 1746-N14

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1746-N14: 1746-N14.

The 1746-N14 is a the manufacturer industrial component. Key specifications include special_features: 4 CHANNEL, end_item_identification: CABLE ASSEMBLY SE E/I FSCM 26512, part_name_assigned_by_controlling_agency: INPUT MODULE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-706-1303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1746-N14
NSN: 5315-00-706-1303
NIINs: 007061303, 014604673
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 78500 — MERITOR HEAVY VEHICLE SYSTEMS, LLC (USA)
SPECIFICATIONS
special_features4 CHANNEL
end_item_identificationCABLE ASSEMBLY SE E/I FSCM 26512
part_name_assigned_by_controlling_agencyINPUT MODULE
NSN5315-00-706-1303
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1746-N14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.307 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
FIRST END LOCATION: SMALL END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.307 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
FIRST END LOCATIONSMALL END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.062 INCHES NOMINAL IN
SHANK LENGTH0.612 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
SUBSTITUTES & CROSS-REFERENCES 1
1356M1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1746-N14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1746-N14?
1746-N14 is a 1746-N14. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1746-N14?
There is 1 known substitute for 1746-N14: 1356M1. Substitute compatibility should be verified for your specific system.
What is the NSN for 1746-N14?
1746-N14 is cataloged in the U.S. Government catalog under NSN 5315-00-706-1303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1746-N14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.