PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1743522
1743522 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 3.420 INCHES NOMINAL IN, outside_diameter: 3.666 INCHES NOMINAL IN, material_thickness: 0.200 INCHES NOMINAL IN, outer_edge_thickness: 0.115 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-5053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1743522
NSN: 5330-00-211-5053
FSC: 5330
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter3.420 INCHES NOMINAL IN
outside_diameter3.666 INCHES NOMINAL IN
material_thickness0.200 INCHES NOMINAL IN
outer_edge_thickness0.115 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED, STRAIGHT FACE
NSN5330-00-211-5053
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1743522 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RING STYLE: CONCENTRIC
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, STRAIGHT FACE
•
OUTER EDGE THICKNESS: 0.115 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
MATERIAL THICKNESS: 0.200 INCHES NOMINAL IN
•
INSIDE DIAMETER: 3.420 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.666 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RING STYLECONCENTRIC
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, STRAIGHT FACE
OUTER EDGE THICKNESS0.115 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
MATERIAL THICKNESS0.200 INCHES NOMINAL IN
INSIDE DIAMETER3.420 INCHES NOMINAL IN
OUTSIDE DIAMETER3.666 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
95932Interchangeable
interchangeable cross-reference
interchangeable
25Z129D16Interchangeable
interchangeable cross-reference
interchangeable
J48-2064Interchangeable
interchangeable cross-reference
interchangeable
281-1018P4Interchangeable
interchangeable cross-reference
interchangeable
281-1002-2PT4Interchangeable
interchangeable cross-reference
interchangeable
BA98188-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1743522?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1743522?
1743522 is a RING,WIPER.
What parts can replace 1743522?
There are 9 known substitutes for 1743522: 95932, 25Z129D16, J48-2064 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1743522?
1743522 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-5053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1743522

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026