PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17420C11
17420C11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, style_designator: TWO PIECE, material_diameter: 0.312 INCHES NOMINAL IN, surface_treatment: CADMIUM BAND, loop_inside_diameter: 1.750 INCHES NOMINAL IN, integral_nut_type_and_quantity: 2 PLAIN EQUAL LENGTH TONGUES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-358-5725, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17420C11
NSN: 5340-00-358-5725
FSC: 5340
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
materialSTEEL BAND
style_designatorTWO PIECE
material_diameter0.312 INCHES NOMINAL IN
surface_treatmentCADMIUM BAND
loop_inside_diameter1.750 INCHES NOMINAL IN
integral_nut_type_and_quantity2 PLAIN EQUAL LENGTH TONGUES
NSN5340-00-358-5725
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17420C11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
MATERIAL DIAMETER: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
SURFACE TREATMENT: CADMIUM BAND
•
LOOP INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 2 PLAIN EQUAL LENGTH TONGUES
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
MATERIAL DIAMETER0.312 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
SURFACE TREATMENTCADMIUM BAND
LOOP INSIDE DIAMETER1.750 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY2 PLAIN EQUAL LENGTH TONGUES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
103529Upgraded Successor
successor cross-reference
successor
10687315-3Interchangeable
interchangeable cross-reference
interchangeable
59359736941Interchangeable
interchangeable cross-reference
interchangeable
3258519Interchangeable
interchangeable cross-reference
interchangeable
091617Interchangeable
interchangeable cross-reference
interchangeable
952-019Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17420C11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17420C11?
17420C11 is a CLAMP,LOOP.
What parts can replace 17420C11?
There are 27 known substitutes for 17420C11: 103529, 10687315-3, 59359736941 and 24 more. Substitute compatibility should be verified for your specific system.
Is 17420C11 still available?
17420C11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17420C11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026