PartsTable
Technical Data Sheet
17375 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- A rich interactive electronic table set in the fun world of theme parks.<br>- Contains plenty of activities: the shapes area is interactive with lights and sounds, the cogs turn and the characters move when the buttons are pressed.<br>- Includes a fun route with balls and slides that ends in the table’s feet.<br>- Stimulates manual skills, visual perception and recognition of the cause-effect relationship. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-003-6559, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
17375
NSN: 5330-00-003-6559
FSC: 5330
CAGE: 3CPE0 — SAFRAN POWER USA LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
hardness_rating50.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
special_featuresCOLOR BLACK
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-003-6559
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17375 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
HARDNESS RATING: 50.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server thermal management and cooling
  • Hot-swap fan replacement in production environments
  • Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q OVERALL
SPECIAL FEATURESCOLOR BLACK
HARDNESS RATING50.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
GEM50015Interchangeable
interchangeable cross-reference
interchangeable
R5291PC5Interchangeable
interchangeable cross-reference
interchangeable
17375Interchangeable
interchangeable cross-reference
interchangeable
C62250Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-60 TY1SEAST2Interchangeable
interchangeable cross-reference
interchangeable
1128Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17375?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17375?
17375 is a LATCH,FAN DUCT ACCESS manufactured by Clementoni.
What parts can replace 17375?
There are 12 known substitutes for 17375: GEM50015, R5291PC5, 17375 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17375?
17375 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-003-6559. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17375