PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17360-B-0440-28
17360-B-0440-28 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,HINGED,THREADED is a the manufacturer industrial component. Key specifications include length: 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN, diameter: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, surface_treatment: CADMIUM OR TIN OR ZINC OVERALL, cross-sectional_shape: RECTANGULARRECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-306-5605, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17360-B-0440-28
NSN: 5340-01-306-5605
FSC: 5340
CAGE: 1FJ15 — EMHART INDUSTRIES AMATOM ELECTRONICS HARDWARE DIV (USA)
SPECIFICATIONS
length0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
diameter0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
special_featuresHINGED; FSC APPLICATION DATA: PS DATA CIRCUIT TERM ON PEACE SHIELD AHINGED; FSC APPLICATION DATA: PS DATA CIRCUIT TERM ON PEACE SHIELD A
surface_treatmentCADMIUM OR TIN OR ZINC OVERALL
cross-sectional_shapeRECTANGULARRECTANGULAR
NSN5340-01-306-5605
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17360-B-0440-28 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE: RECTANGULARRECTANGULAR
•
DIAMETER: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
SURFACE TREATMENT: CADMIUM OR TIN OR ZINC OVERALL
•
LENGTH: 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPERECTANGULARRECTANGULAR
DIAMETER0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
SURFACE TREATMENTCADMIUM OR TIN OR ZINC OVERALL
SPECIAL FEATURESHINGED; FSC APPLICATION DATA: PS DATA CIRCUIT TERM ON PEACE SHIELD AHINGED; FSC APPLICATION DATA: PS DATA CIRCUIT TERM ON PEACE SHIELD A
LENGTH0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
031-020-02Interchangeable
interchangeable cross-reference
interchangeable
41818-21Interchangeable
interchangeable cross-reference
interchangeable
1817PInterchangeable
interchangeable cross-reference
interchangeable
TT17Interchangeable
interchangeable cross-reference
interchangeable
Q90Interchangeable
interchangeable cross-reference
interchangeable
3027Interchangeable
IBM - 9GB U160 10K 68pin Drive
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17360-B-0440-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17360-B-0440-28?
17360-B-0440-28 is a STANDOFF,HINGED,THREADED.
What parts can replace 17360-B-0440-28?
There are 18 known substitutes for 17360-B-0440-28: 031-020-02, 41818-21, 1817P and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17360-B-0440-28?
17360-B-0440-28 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-306-5605. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17360-B-0440-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026