PartsTable
Technical Data Sheet
Download PDF

17355-SS-1032-7 — STANDOFF,HINGED,THREADED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

17355-SS-1032-7: STANDOFF,HINGED,THREADED.

The STANDOFF,HINGED,THREADED is a the manufacturer industrial component. Key specifications include length: 2.000 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, thread_class: 2B RIGHT INTERNAL, thread_length: 0.500 INCHES NOMINAL RIGHT INTERNAL IN, style_designator: HINGED, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-431-7599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17355-SS-1032-7
NSN: 5340-01-431-7599
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length2.000 INCHES NOMINAL IN
diameter0.375 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
thread_class2B RIGHT INTERNAL
thread_length0.500 INCHES NOMINAL RIGHT INTERNAL IN
style_designatorHINGED, THREADED
thread_directionRIGHT-HAND RIGHT INTERNAL
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES RIGHT INTERNAL IN
cross-sectional_shapeROUND
thread_quantity_per_inch32 RIGHT INTERNAL
thread_series_designatorUNF LEFT INTERNAL (INCLUDES THRU THREAD)
NSN5340-01-431-7599
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17355-SS-1032-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 E-300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.500 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: HINGED, THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
TECHNICAL CHARACTERISTICS
LENGTH2.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 E-300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.500 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
THREAD LENGTH0.500 INCHES NOMINAL RIGHT INTERNAL IN
STYLE DESIGNATORHINGED, THREADED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.375 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
NOMINAL THREAD SIZE0.190 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
073-009889-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 17355-SS-1032-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17355-SS-1032-7?
17355-SS-1032-7 is a STANDOFF,HINGED,THREADED.
What parts can replace 17355-SS-1032-7?
There is 1 known substitute for 17355-SS-1032-7: 073-009889-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 17355-SS-1032-7?
17355-SS-1032-7 is cataloged in the U.S. Government catalog under NSN 5340-01-431-7599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17355-SS-1032-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.