PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 173530

173530 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: HYDRAULIC POWER UNIT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-108-7966, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
173530
NSN: 3110-00-108-7966
FSC: 3110
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyHYDRAULIC POWER UNIT
NSN3110-00-108-7966
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 173530 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: LUBRICANT
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESEXTRA CAPACITY OUTER RACE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
ALIGNMENT TYPERIGID
LUBRICATION MATERIALLUBRICANT
OVERALL WIDTH1.0000 INCHES NOMINAL IN
BORE DIAMETER1.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, CLOSED END, DRAWN SHELL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
148437InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
CPA3662-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
927C912-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3855-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
173548InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5910010385395InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 173530?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 173530?
173530 is a BEARING,ROLLER,NEEDLE.
What parts can replace 173530?
There are 15 known substitutes for 173530: 148437, CPA3662-2, 927C912-2 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 173530?
173530 is cataloged in the Federal Logistics Information System under NSN 3110-00-108-7966. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 173530

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026