PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 173487
173487 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include length: 0.320 INCHES NOMINAL IN, material: STEEL, design_type: PLATE, orifice_diameter: 0.750 INCHES NOMINAL IN, outside_diameter: 2.000 INCHES NOMINAL IN, thread_provision: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-1343, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
173487
NSN: 3110-00-117-1343
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
length0.320 INCHES NOMINAL IN
materialSTEEL
design_typePLATE
orifice_diameter0.750 INCHES NOMINAL IN
outside_diameter2.000 INCHES NOMINAL IN
thread_provisionUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
NSN3110-00-117-1343
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 173487 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
OVERALL WIDTH0.3750 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
148448Interchangeable
interchangeable cross-reference
interchangeable
SP7057Interchangeable
interchangeable cross-reference
interchangeable
BH68Interchangeable
interchangeable cross-reference
interchangeable
P23005Interchangeable
interchangeable cross-reference
interchangeable
BH-68-OHInterchangeable
interchangeable cross-reference
interchangeable
148457Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 173487?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 173487?
173487 is a BEARING,ROLLER,NEEDLE.
What parts can replace 173487?
There are 20 known substitutes for 173487: 148448, SP7057, BH68 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 173487?
173487 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-1343. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 173487

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026