PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17338-11

17338-11 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 1.060 INCHES NOMINAL IN, material: STEEL OVERALL, overall_height: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN, material_thickness: 0.018 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-499-8782, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17338-11
NSN: 5340-00-499-8782
FSC: 5340
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length1.060 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_height0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
material_thickness0.018 INCHES NOMINAL IN
NSN5340-00-499-8782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17338-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.018 INCHES NOMINAL IN
•
WIDTH: 0.750 INCHES NOMINAL IN
•
LENGTH: 1.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
MATERIAL THICKNESS0.018 INCHES NOMINAL IN
WIDTH0.750 INCHES NOMINAL IN
LENGTH1.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1436InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8667-1045InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
922785InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
5965895InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17338-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17338-11?
17338-11 is a CLIP,SPRING TENSION.
What parts can replace 17338-11?
There are 4 known substitutes for 17338-11: 1436, 8667-1045, 922785 and 1 more. Substitute compatibility should be verified for your specific system.
Is 17338-11 still available?
17338-11 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17338-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026