PartsTable
Technical Data Sheet
Download PDF

17330-SS-0632-7 — STANDOFF,HINGED,THREADED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

17330-SS-0632-7: STANDOFF,HINGED,THREADED.

The STANDOFF,HINGED,THREADED is a the manufacturer industrial component. Key specifications include length: 0.750 INCHES NOMINAL IN, diameter: 0.312 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, thread_class: 2B RIGHT INTERNAL, thread_length: 0.122 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN, style_designator: HINGED, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-422-3909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17330-SS-0632-7
NSN: 5340-01-422-3909
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length0.750 INCHES NOMINAL IN
diameter0.312 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
thread_class2B RIGHT INTERNAL
thread_length0.122 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
style_designatorHINGED, THREADED
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.138 INCHES RIGHT INTERNAL IN
cross-sectional_shapeROUND
thread_quantity_per_inch32 LEFT INTERNAL (INCLUDES THRU THREAD)
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) LEFT INTERNAL (INCLUDES THRU THREAD)
NSN5340-01-422-3909
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17330-SS-0632-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.750 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.122 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: HINGED, THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
TECHNICAL CHARACTERISTICS
LENGTH0.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.122 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
THREAD LENGTH0.122 INCHES MINIMUM RIGHT INTERNAL IN
STYLE DESIGNATORHINGED, THREADED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.312 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
NOMINAL THREAD SIZE0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
308-01 SS 6-32 EReference document
Same NSN cross-reference
Reference document — Secondary reference
17330-SS-0632Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 17330-SS-0632-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17330-SS-0632-7?
17330-SS-0632-7 is a STANDOFF,HINGED,THREADED.
What parts can replace 17330-SS-0632-7?
There are 2 known substitutes for 17330-SS-0632-7: 308-01 SS 6-32 E, 17330-SS-0632. Substitute compatibility should be verified for your specific system.
What is the NSN for 17330-SS-0632-7?
17330-SS-0632-7 is cataloged in the U.S. Government catalog under NSN 5340-01-422-3909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17330-SS-0632-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.