PartsTable
Technical Data Sheet
Download PDF

17316396 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

17316396: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 9.0 MILLIMETERS NOMINAL MM, material: STEEL BAND, overall_width: 15.88 MILLIMETERS MINIMUM AND 16.00 MILLIMETERS MAXIMUM MM, special_features: COATING:RIV/EC 8 PM;STANDARD:18-1101, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-703-4473, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17316396
NSN: 5340-01-703-4473
FSC: 5340 — Hardware, Commercial
CAGE: A4249 — IVECO DEFENCE VEHICLES S.P.A. (ITA)
SPECIFICATIONS
diameter9.0 MILLIMETERS NOMINAL MM
materialSTEEL BAND
overall_width15.88 MILLIMETERS MINIMUM AND 16.00 MILLIMETERS MAXIMUM MM
special_featuresCOATING:RIV/EC 8 PM;STANDARD:18-1101
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.8 MILLIMETERS MINIMUM AND 1.0 MILLIMETERS MAXIMUM MM
loop_inside_diameter8.0 MILLIMETERS NOMINAL MM
end_item_identification2355-01-669-0331
distance_from_loop_center_to_tongue_end25.42 MILLIMETERS MINIMUM AND 25.50 MILLIMETERS MAXIMUM MM
center_to_center_distance_between_loop_and_mounting_hole17.5 MILLIMETERS NOMINAL MM
NSN5340-01-703-4473
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17316396 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 9.0 MILLIMETERS NOMINAL MM
•
MATERIAL THICKNESS: 0.8 MILLIMETERS MINIMUM AND 1.0 MILLIMETERS MAXIMUM MM
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 25.42 MILLIMETERS MINIMUM AND 25.50 MILLIMETERS MAXIMUM MM
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER9.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH15.88 MILLIMETERS MINIMUM AND 16.00 MILLIMETERS MAXIMUM MM
MATERIAL THICKNESS0.8 MILLIMETERS MINIMUM AND 1.0 MILLIMETERS MAXIMUM MM
DISTANCE FROM LOOP CENTER TO TONGUE END25.42 MILLIMETERS MINIMUM AND 25.50 MILLIMETERS MAXIMUM MM
SPECIAL FEATURESCOATING:RIV/EC 8 PM;STANDARD:18-1101
END ITEM IDENTIFICATION2355-01-669-0331
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE17.5 MILLIMETERS NOMINAL MM
MATERIALSTEEL BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 17316396?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17316396?
17316396 is a CLAMP,LOOP.
What is the NSN for 17316396?
17316396 is cataloged in the U.S. Government catalog under NSN 5340-01-703-4473. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17316396

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.