PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 173036
173036 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a Hama industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.187 INCHES NOMINAL IN, outside_diameter: 1.254 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-966-6614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
173036
NSN: 5330-00-966-6614
FSC: 5330
CAGE: 71791 — CURTISS-WRIGHT CONTROLS, INC. DBA CURTISS WRIGHT DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.187 INCHES NOMINAL IN
outside_diameter1.254 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.875 INCHES NOMINAL IN
NSN5330-00-966-6614
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 173036 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.187 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.254 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.187 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
END ITEM IDENTIFICATIONW/S:GRADER, ROAD (130G); USNS STALWART CLASS TAGOS; SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE); GRADER, ROAD MOTORIZED, 130-G; HELICOPTER, SEA KING H-3; HAYES CLASS T-AG 195; VICTORIOUS CLASS T-AGOS 19; SCRAPER (621B); SCRAPER TRACTOR, WHEELED G
HOUSING BORE DIAMETER1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
8624Interchangeable
interchangeable cross-reference
interchangeable
624Interchangeable
interchangeable cross-reference
interchangeable
5174Interchangeable
interchangeable cross-reference
interchangeable
8694Interchangeable
interchangeable cross-reference
interchangeable
6454-1Interchangeable
interchangeable cross-reference
interchangeable
E174CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 173036?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 173036?
173036 is a SEAL,PLAIN ENCASED manufactured by Hama.
What parts can replace 173036?
There are 18 known substitutes for 173036: 8624, 624, 5174 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 173036?
173036 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-966-6614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 173036

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026