The Handling Set,swa Component, cataloged under National Stock Number 1730-01-048-5549, is classified within Federal Supply Class 1730 (Aircraft Ground Servicing Equipment) of the Aircraft Launch, Landing, and Ground Handling Equipment group. Government technical data includes 2 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 1730-01-048-5549 |
| Item Name | Handling Set,swa Component |
| FSC / FSG | 1730 / 17 — Aircraft Ground Servicing Equipment |
| Status | ACTIVE |
| Reference Data and Literature | TO 33D-1-111 |
| Functional Description | CONSISTS OF A BEAM ASSEMBLY, TROLLEY AND MANUAL HOIST. IT IS USED TO REMOVE AND REPLACE MAJOR COMPONENTS OF THE SWA DRIVE/PULLEY ASSEMBLY. THE DRIVE PULLEY ASSEMBLY IS IN A CONFINED AREA ABOVE THE CEILING. COMPONENTS ARE LOWERED OR RAISED THROUGH AN ACCESS OPENING IN THE CEILING. THE BEAM IS ATTACHED AT BOTH ENDS WITH TUBE AND SUPPORT ASSEMBLIES TO AN UPPER LOBE FRAME. COMPONENTS MAY BE MOVED EITHER LATERALLY OR LONGITUDINALLY IN THE AIRCRAFT DEPENDING UPON BEAM ATTACHMENT CONFIGURATION. THE SUPPORT ASSEMBLIES ARE SEPARATED BY TUBES APPROXIMATELY 2 FEET LONG AND ARE YOKED TO THE 7 FOOT (APPROXIMATELY) BEAM WITH BOLTS AND SWIVEL PLATES FT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 226-15037-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 1730-01-048-5549 is a Handling Set,swa Component, classified under FSC 1730, Aircraft Ground Servicing Equipment. Status: active.
Key specifications for 1730-01-048-5549: Reference Data and Literature: TO 33D-1-111; Functional Description: CONSISTS OF A BEAM ASSEMBLY, TROLLEY AND MANUAL HOIST. IT IS USED TO REMOVE AND REPLACE MAJOR COMPONENTS OF THE SWA DRIVE/PULLEY ASSEMBLY. THE DRIVE PULLEY ASSEMBLY IS IN A CONFINED AREA ABOVE THE CEILING. COMPONENTS ARE LOWERED OR RAISED THROUGH AN ACCESS OPENING IN THE CEILING. THE BEAM IS ATTACHED AT BOTH ENDS WITH TUBE AND SUPPORT ASSEMBLIES TO AN UPPER LOBE FRAME. COMPONENTS MAY BE MOVED EITHER LATERALLY OR LONGITUDINALLY IN THE AIRCRAFT DEPENDING UPON BEAM ATTACHMENT CONFIGURATION. THE SUPPORT ASSEMBLIES ARE SEPARATED BY TUBES APPROXIMATELY 2 FEET LONG AND ARE YOKED TO THE 7 FOOT (APPROXIMATELY) BEAM WITH BOLTS AND SWIVEL PLATES FT; Part Name Assigned by Controlling Agency: SWA COMPONENT HANDLING SET; End Item Identification: E-4A AND B ACFT A. 2 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 1730-01-048-5549 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.