PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 172MJS1
172MJS1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 0.708 INCHES NOMINAL IN, outside_diameter: 0.984 INCHES NOMINAL IN, material_thickness: 0.978 INCHES NOMINAL IN, outer_edge_thickness: 0.078 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-623-0872, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
172MJS1
NSN: 5330-00-623-0872
FSC: 5330
CAGE: 556A6 — LINDE MATERIAL HANDLING NORTH AMERICA CORPORATION (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter0.708 INCHES NOMINAL IN
outside_diameter0.984 INCHES NOMINAL IN
material_thickness0.978 INCHES NOMINAL IN
outer_edge_thickness0.078 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
NSN5330-00-623-0872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 172MJS1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.708 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.978 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.984 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
OUTER EDGE THICKNESS: 0.078 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.708 INCHES NOMINAL IN
MATERIAL THICKNESS0.978 INCHES NOMINAL IN
OUTSIDE DIAMETER0.984 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OUTER EDGE THICKNESS0.078 INCHES NOMINAL IN
RING STYLECONCENTRIC
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
44564Interchangeable
interchangeable cross-reference
interchangeable
L31004533Interchangeable
interchangeable cross-reference
interchangeable
A14527Interchangeable
interchangeable cross-reference
interchangeable
73375Interchangeable
interchangeable cross-reference
interchangeable
101073Interchangeable
interchangeable cross-reference
interchangeable
103537Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 172MJS1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 172MJS1?
172MJS1 is a RING,WIPER.
What parts can replace 172MJS1?
There are 20 known substitutes for 172MJS1: 44564, L31004533, A14527 and 17 more. Substitute compatibility should be verified for your specific system.
Is 172MJS1 still available?
172MJS1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 172MJS1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026